Standard process: Spindle incoming whole machine inspection - spindle disassembly - comprehensive inspection - quotation - contract signing - maintenance - delivery. If the customer needs on-site disassembly, we can also provide on-site disassembly (the spindle is removed from the equipment) to the customer, and then install it back to the machine tool after maintenance.

    The spindle maintenance market is different from that of more than ten years ago. Before 2010, there were few imported spindles and high-speed motors that could be repaired nationwide, but now there are many more. However, if there are more, they will be uneven. There are maintenance centers set up by foreign spindle plants, such as Fischer and SKF, and there are also private workshops that used to build ordinary motors, but now they also build imported spindles. In this way, the quality and cost of maintenance will vary greatly! The same electric spindle imported from Europe, standard maintenance, sometimes the maintenance center set up by the European spindle factory, and the maintenance price of domestic private workshops can vary several times. Of course, the quality varies greatly.

   Our Aixin drive is a unique one in the imported spindle/motor maintenance market. First, we began to engage in the agency sales service of imported motorized spindles and related products in 2005, and began to engage in the maintenance business of imported spindles and motors in 2009. It is relatively early in China and has rich experience and resources. In addition, the most important thing is that our maintenance center cooperates with Renaud Spindle Factory in Switzerland, and Renaud provides us with technical support. Therefore, we are a professional domestic enterprise engaged in import spindle business for many years, with the background of Swiss spindle factory. In this way, the maintenance quality can be guaranteed to reach the level of European brand spindle plants, while the cost, time and flexibility are obviously superior to those of foreign-funded enterprises.

              There are several possibilities for a loose broach: first, the claw is worn, second, the broach spring is not in good condition after a long time, third, the handle is worn, and fourth, the taper hole is worn. If the claw, spring and handle are worn, new parts need to be replaced. When the taper hole is worn, it will not be more complete, but will be repaired. There are also specific forms of taper holes: if it is a 7:24 taper hole, you can directly grind the taper hole and end face in many cases to meet the use requirements. If the taper hole is 1:10, generally the taper hole and the end face fit together. This requires first grinding chips, then electroplating, and then grinding chips to the original size to meet the original performance of the spindle.